Servo Presser iyo Qaybaha Waaweyn ee Mashiinka Saliidda
KST-660 servo quantitative valve qeeybaha ugu muhiimsan: kursiga hagaajinta, tareenka slide, motor servo, qolka saliidda tirada, piston tirada saxda ah, jirka waalka hoose, piston cylinder, iyo tuubada saliidda.
| Xaalada | 0.05cc-20cc |
| Saxnaanta | ± 1% -2% |
| Gunnada | NLGI # 00- # 3 |
| Cadaadis lagu dabaqi karo | 6-120kg / cm2 |
| Baahida cadaadiska hawada | 0.4 ~ 0.6MPa |
| Miisaanka | 3kg |
| Cabbirka | 45 * 90 * 380mm |
| Heerkulka jawiga shaqada | -10 °C ~ + 50 °C |
1. Alaabtu tiro ahaan waa sax.
2. Xakamaynta xakamaynta ayaa si toos ah u dejisa qadarka saliidda si looga dhaafo tallaabada hagaajinta gacanta.
3. Tilmaamaha si toos ah ayaa loo kaydin karaa iyo fiilooyinka kontoroolka kontoroolka.
4. Wuxuu dejin karaa saliidda tufida inay si siman u tufto.
5. Adkeysi leh. Tirtiridda daadinta, qulqulka, burushka iyo ifafaalaha kale.
6. Waxaa lagu qalabeyn karaa buuxinta, tufi, xaqiijinta kormeerka inductor, waxay yeelan kartaa saameyn dib-u-celin ah.
7. Marka loo eego xaaladda dhabta ah, waxaa lagu barbar dhigi karaa kooxo badan oo boosas go'an oo go'an.
8. Waxaa lagu marsiin karaa NLGI # 00- # 3 dufan, badh-adag, viscosity sare, dareere, iyo wixii la mid ah.
Qaybaha ugu muhiimsan ee waalka tirada ee KST: hagaajin kursiga, kayd tiro ahaan, bistoon qiyaaseed sax ah, jidhka waalka hoose, piston cylinder, iyo tuubada saliidda.
| model | KST-701 | KST-150 | KST-550 | KST-033 |
| Waqtiga | 0.007cc-0.1cc | 0.05cc-1cc | 0.5cc-5cc | 3cc-30cc |
| Saxnaanta | ± 1% -3% | ± 1% -2% | ||
| Gunnada | NLGI#00-#3 | |||
| Cadaadis ku habboon | 6-50kg/cm² | 6-100kg/cm² | ||
| Baahida cadaadiska hawada | 0.4 ~ 0.6MPA | |||
| miisaanka | 0.5kg | 1.3kg | 1.6kg | 2.3kg |
| Cabbirrada mm | 28*28*108 | 38*46*225 | 45*56*230 | 48*58*265 |
| deegaanka shaqada | -10-+50 ℃ | |||
1. Badeecada waa la qiyaasaa, waxaana jira noocyo kala duwan oo laga dooran karo.
2. Adkeysi leh. Tirtir daadinta, qulqulka, burushka iyo ifafaalaha kale.
3. Waxaa lagu qalabayn karaa buuxinta, tufi saliid xaqiijinta tilmaame leh saamayn wasakhaysan.
4. Marka loo eego xaaladda dhabta ah, waxaa lagu barbar dhigi karaa kooxo badan oo boosaska go'an ee go'an.
5. Waxaa lagu marsiin karaa NLGI # 00- # 3 dufan, badh-adkeyg ah, viscosity sare, dareere, iyo wixii la mid ah.
Faa'iidada:
1. Horizontal, cirbad toos ah si loo beddelo sanka.
2. Buufiska isdhaafka ah iyo usha dheer ee dhererkeedu ≤1000mm waxay noqon kartaa sabab la'aan.
Goobta codsiga:
NLGI # 00- # 3 subag, badh-adkeyg, viscosity sare, dareere.
| model | KST-810P |
| Waqtiga | xakameynta waqtiga |
| Saxnaanta | ± 10% |
| Saliid ku habboon | NLGI # 00- # 3 baruur |
| deegaanka shaqada | -10 ° C - + 50 ° C |
| Cadaadis ku habboon | 6-120kg / cm2 |
| Baahida cadaadiska hawada | 0.4-0.6MPa |
| miisaanka | 0.5kg |
| Cabbirka | 30mm * 30mm * 150mm |
Faa'iidada:
1. Waxaa la bixin karaa cabbirro kala duwan.
2. Isbeddelka rasterku wuxuu ku guuleysan karaa xakamaynta fudud ee qadarka xabagta (saliid).
3. Waxa loo isticmaali karaa hagaajinta biraha hagaajinta hex iyo hagaajintalowska la aasay.
4. Ogaanshaha irbadda oo leh hagaajinta daaqsinka ayaa la dooran karaa.
| Cadaadiska ugu badan | 100bar |
| Cadaadiska min | 6bar |
| Soo noqnoqda | 200 ilbiriqsikii |
| Cabirka | 142mm*58mm*15mm(ugu dheer) 125mm*58mm*15mm (ugu gaaban) |
| model | KST-610 |
| Astaamaha | Isku day shaqada, raad raac codsiga |
| Cadaadiska shaqada | Ilaa 180kg / cm2 |
| codsi | Saliid dareere ah, xabag aan adagayn |
| Baahida cadaadiska hawada | 0.4-0.6MPa |
| cabbir jireed | 30mm * 30mm * 175mm |
